Description
The GGM HDEXT2K50M is a kit comprising an emitter which converts a signal coming from an HDMI source into a network RJ45 cable, as well as a receiver which converts the signal from the network cable into HDMI in order for it to go towards a display, monitor or screen.
The receiver is powered via the PoE network cable and has therefore no need of a bulky power supply. These are Plug and Play products requiring no installation configuration. Furthermore, in the rare case where pairing is difficult, the EDID configuration simplifies the procedure.
The emitter has a “loop out” HDMI output in order to display the source contents on a local screen.
Technical data
HDMIType : HDMI 1.4
HDCP: HDCP 1.2
Supported resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 3D:1080p@60Hz
Cable type: CAT5e Minimum
Lenght: Until 50M en CAT6
IR and remote control:IR 20~60kHz
EDID: Yes
Supported audio format: PCM, AC3, DTS
Working temperature: 0-60°C
Power supply: 5V 2A - Rx powered by POE
Consumption: TX<3W RX<3W
Dimensions: 71.6 (L) × 66.9 (l) × 22.6 (H) mm x 2pcs
Weight: TX:70g RX: 70g
Declinations
|
GGM HDOIP4K3KIT
HDMI EMIT extension kit + IP Receiver HDbit T 4K 30Hz.
|
HDMI EMIT extension kit + IP Receiver HDbit T 4K 30Hz.
|
|
GGM HDOIP4K3R
HDbit T Over IP receiver 4K 30Hz
|
HDbit T Over IP receiver 4K 30Hz
|
|
GGM HDEXT2K50M
Extension kit HDMI 1080p 50M
|
Extension kit HDMI 1080p 50M
|
|
GGM HDEXT2K60MKVM
HDMI and KVM 60M extension for network cable
|
HDMI and KVM 60M extension for network cable
|
|
GGM CORDHDMI2M
HDMI 1.4 high speed video cord with Ethernet A/A 2 m (black)
|
HDMI 1.4 high speed video cord with Ethernet A/A 2 m (black)
|
|
GGM CORDHDMI5M
HDMI 1.4 high speed video cord with Ethernet A/A 5 m (black)
|
HDMI 1.4 high speed video cord with Ethernet A/A 5 m (black)
|
Files